HFSAC-8022-24-ER16 | 2.2 kW | 24,000 rpm | air-cooled
HFSAC-8022-24-ER16
This is our most powerful air cooled HF-spindle. With 2.2 kW, this spindle offers a maximum of torque reserve which can be used to chip different materials with tools up to 10 mm thanks to its ER16 collet taper. For this spindle, no additional coolant aggregates are necessary because of the integrated fan. Thanks to the asynchronous drive technique, the spindle is running very smooth and quiet, up to 12,000 rpm a difference to water cooled spindles isn't even noticeable.
Box contents
Optional
This is our most powerful air cooled HF-spindle. With 2.2 kW, this spindle offers a maximum of torque reserve which can be used to chip different materials with tools up to 10 mm thanks to its ER16 collet taper. For this spindle, no additional coolant aggregates are necessary because of the integrated fan. Thanks to the asynchronous drive technique, the spindle is running very smooth and quiet, up to 12,000 rpm a difference to water cooled spindles isn't even noticeable.
Box contents
- Motor spindle HFSAC-8022-24-ER16
- Clumping nut ER16 - precision-balanced G 2,5
- Operating Manual
Optional
- Sealing air
- Rotation sensor
- Spindle cap with laterally plug
| Type designation | HFSAC-8022-24-ER16 |
| Product number | SP-303 |
| Field of application | Cutting, Engraving |
| Engine typ | Three-phase induction motor |
| Drive Power | S1 (100%) 2.2 kW | S6 (50%) 2.5 kW |
| Rotation speed | 24,000 rpm |
| Torque | max. 0.98 Nm |
| Voltage | 230V |
| Current | S1 (100%) 8.0 A | S6 (50%) 8.6 A |
| Frequency | 400 Hz |
| Base frequency | 400 Hz |
| Number of poles | 2 |
| Weight | 4.0 kg |
| Cooling method | Air cooling (forced cooling) |
| Housing temperature | 45 °C |
| IP Code | IP20 |
| Spindle bearings | High precision bearings maintenance-free according to ABEC7/P4S |
| Runout (taper) | < 5.0 µm |
| Tool change | Manually, clamping nut |
| Tool interface | ER16 |
| Clamping Range | 1 - 10 mm |
| External diameter | 80 mm |
Datenblatt:
